ErgoDox Wireless Lite is the ultimate affordable ergonomic, split, wireless keyboard! The Lite comes with a layered case featuring an aluminum plate and includes RGB underglow.
If you are an existing ErgoDox user, this is the perfect chance to upgrade to wireless while keeping the same, familiar layout. If you are new to the world of split ergonomic keyboards, this is a fantastic entry-level option to get your feet wet.
Looking for something more premium? Check out the ErgoDox Wireless Pro!
Looking for something more portable? Check out the ErgoDoxLP Wireless!
Not sure about the different options? Check out the product comparison table!
Estimated Shipping Time (Updated December 11, 2024)
The lead time is subject to minor changes based on inventory levels. This estimate is only for orders placed right now; orders placed earlier may have been given a different shipping estimate.
- No custom top (silver plate): in stock, ships in 3-4 business days
- No custom top (black plate): in stock, ships in 3-4 business days
- Matte white acrylic top (silver plate): in stock, ships in 3-4 business days
- Walnut MDF top (silver plate): in stock, ships in 3-4 business days
- Translucent acrylic top (silver plate): in stock, ships in 3-4 business days
Lead time may be longer if you are purchasing with a carrying case, tenting kit, or wrist rests. Feel free to contact us for more the current addon shipping estimates.
Case Information
The ErgoDox Wireless Lite comes with a layered case consisting of an aluminum top plate, a 3D printed middle layer, and a clear acrylic bottom layer.
The aluminum plate is anodized and comes with a clean matte finish (you can zoom in on the product photos). The plate is available in silver and black.
If you prefer a different look, you can add a custom top layer. The custom layer would go above the silver aluminum plate. The following top layer options are available:
- Matte white acrylic
- Walnut MDF
The 3D printed middle layer is available in black and white. By default, it is black for orders with a black aluminum plate and white for all other options (silver plate no top, white top, and walnut top). If you prefer the other 3D printed middle layer color option, please send us a message after placing your order.
Please check out the ErgoDox Wireless photo gallery to see some builds that our customers have put together.
Keyboard Addons
- Carrying Case (Hard)
- Carrying Case (Soft)
- Foam for improving keyboard acoustics
- Grifiti Wrist Rest
- Tenting Kit
Dongle
A dongle such as the Raytac USB Dongle is recommended with your keyboard for maximizing the keyboard battery life (more information).
You can add the dongle by choosing the appropriate product option above or separately adding the dongle to your cart - there is no difference.
Keyboard Features
- No soldering required: PCB comes with hot swap sockets so there is no need to solder switches and you can change them as needed. Diodes and other electronics also come pre-soldered.
- Completely wireless: No wire between the keyboard halves, no wire to your computer.
- Designed to work with the ZMK firmware, which allows powerful keymap customization and seamlessly switching between multiple devices.
- Use with a dongle to maximize battery life or without a dongle for optimal portability/convenience (more information).
- Each keyboard half includes a USB C port for firmware flashing and battery charging.
- Give your keyboard a unique look with RGB underglow (firmware support in beta).
Included
- Keyboard case components
- Keyboard PCB with electronics
- LiPoly battery
- Rubber feet
Not Included
- MX Switches (more information)
- MX Keycaps (more information)
- Stabilizers (more information, optional)
Assembly
As is typical with keyboard kits, some assembly is required. In particular, you will need to install switches into the hot swap sockets and keycaps onto the switches (switches and keycaps are not included as mentioned above).
This is a very straightforward process and requires no soldering (see assembly video). If you prefer to receive a keyboard with switches/keycaps preinstalled, please consider using our assembly service.
More Information
Technical Details
- Weight (including both halves):
- No custom top: 450g (1.0lb) without switches and keycaps
- With custom top: 500g (1.1lb) without switches and keycaps
- Switches and keycaps add approximately 350g (0.8lb)
- Dimensions (of one keyboard half):
- No custom top: 20.0cm x 19.4cm x 1.7cm (7.9" x 7.6" x 0.7") without switches and keycaps
- With custom top: 20.0cm x 19.4cm x 2.0cm (7.9" x 7.6" x 0.8") without switches and keycaps
- Total height approximately 2.5cm-3.5cm (1.0"-1.4") with switches and keycaps, depending on keycap profile